3D Printing Materials

Vero

At a glance

Process

Polyjet

Lead Time

As fast as 1 day

Colors

White, Black

Resolution

0.016 mm (White), 0.03 mm (Black)

Price

$$$

Applications

Visual models, high-accuracy test fits, low-volume production units

About the material

Vero is a high resolution 3D printing material that’s excellent for checking your prototype’s fit and accuracy. With its 16 micron resolution, this material works great for visual models, especially if they require painting.

Vero is printed using PolyJet 3D printing technology, meaning that parts are made from a photopolymer resin and cured with a UV light. This is quite different from typical printing methods of of heating plastics or using a laser, which can lead to warpage or shrinkage on larger parts.

Material Properties

Tensile Strength

50 MPa (7250 PSI)

Elongation at Break

10%

Modulus of Elasticity

2000 MPa (290000 PSI)

Flexural Strength

75 MPa (11000 PSI)

Material Finish

VeroWhite is our high resolution 3D printed material. The material finish is an opaque white and is perfect for visual models and checking the fit and features of your prototype. The layering or stepping is minimally visible due to the color and high resolution of this manufacturing process.

Design Recommendations

Max Part Size [x, y, z]

490 × 390 × 200 mm
19.3 × 15.4 × 7.9 in

Min Clearance + Gaps for Fit

0.2 mm offset on each wall is the recommended gap for enclosures.

Min Wall Thickness

1 mm min

Internal Cavities

Internal cavities are highly discouraged with VeroClear due to the water-based support material that will swell and change the geometry overtime if left inside. Note that support material that has no direct line of sight inside a cavity cannot be cleaned out.

Threads & Inserts

For Vero, we recommend you use either press or heat inserts. For more information, check out our article on The Best Fasteners for 3D Printed Parts.

Text Guidelines

Text should be embossed by at least 1.0 mm to stay visible after printing. Text should also be at least 1.5 mm thick in all areas.

Tolerance

Tolerance for Vero is +/- 0.004”, or +/- 0.001” per inch, whichever is greater.

YOU MIGHT ALSO BE INTERESTED IN

Recommended Wall Thickness for 3D Printing

One of the most important considerations when designing parts for 3D printing in 2022 is the 3D printing wall thickness, sometimes referred to as the wall thickness. While 3D printing makes prototyping easier than ever—not only in terms of cost and speed, but also in regards to DFM (design for manufacturing), you can’t disregard DFM […]

Learn More

Methods for Cleaning 3D Printed Parts

You’ve envisioned it, you’ve modeled it, and you’ve printed it. As it turns out, however, your newly printed prototype may need a bit more TLC before it appears, or functions as intended. 3D printed part finishing often involves a cleaning step to improve appearances or remove unwanted support material.  The purpose of this article is […]

Learn More